Steelex D1067 - Japanese Water Stone - 8-1/8" L x 2-1/2" W x 1-3/8" T - 800 Gr. Acetal Body The ¾" pads wear well

The ¾" pads wear well and do an excellent job on any sand surface

200 Maximum Depth of Cut 1/8" Feed Rate (FPM) 16 and 20 Motor Power (HP) 3 Dust Collection Minimum CFM Required 600 CFM Number of Speeds 2 Number of Knives 48 Maximum Planing Thickness 6" Cutterhead Diameter 2-5/8" Motor Amps 15 Dust Port Outside Diameter 4" Motor Phase (PH) 1 Table Size with Extensions (L x W) 15 x 49

Shipping Dimensions (Inches) 60" x 44" x 68" * specifications subject to change without notice

Use regulator with gauge with Porter Cable Filter PXCM019-0350

Quick-release counter die makes for fast loading and unloading

Steelex D1067 - Japanese Water Stone - 8-1/8" L x 2-1/2" W x 1-3/8" T - 800 Gr. Acetal Body The ¾" pads wear wellTo achieve a surgically sharp edge on your tools, nothing works faster or better than Japanese water stones. The abrasive slurry produced on top of the stone cuts aggressively and polishes the blade as it sharpens. If you've never tried sharpening with water stones before, you'll be astounded by the results. Size: 8 1 8" L x 2 1 2" W x 1 3 8" T, Grit: 800.